FLUKE-CV200
Fluke 红外红色 IR 检视窗取自 Fluke 的 ClirVu® IR 窗口可增加和提高电气热成像检验的安全和速度。 这些检视窗还可减少电弧闪光和触电风险,提高人员的安全性并减少预防性维护的时间和成本。快速和简单安装,只要一个技术人员,只需 5 分钟 仅需要一个带标准 Greenlee® 冲头的孔(后方接入仅需冲头连接) 从正面安装,无需模板或后方接入 使用专利未决 AutoGround™ 过程即时接地至金属外壳 锁紧螺母上的锋利锯齿可确保四个气密接地连接 所有组件均具有导电表面,以实现最佳接地 工作许可要求和 NFPA 70E 流程显著降低和减少 通常不需要全套 PPE,因此可快速简单地完成检验。 出色的燃弧保护 高温硅衬垫 安装和门闩锁提供高压力衬垫压缩 压铸组件均由最高强度合金制造 锁紧螺母螺钉由 4037 钢制成,热处理至 160,000 psi 拉伸 IP67 级防护 防腐蚀和防紫外线性,用于恶劣的户外环境 三种尺寸 50mm、75mm 和 95mm,带手转的选件或安全钥匙门闩锁 ### 标准Torture 经测试符合最高测试额定值:在 KEMA 测试 IEEE C37.20.7 63 kA 电弧、UL 50/50E/50V、UL1558、IEC60529-1:IP67、IEC 60068、NEMA 4/12、CSA C22.2 NO. 14-13:2012 和 CE。### 附件
Compliance without compromise. Safety without sacrifice. Increase the safety and speed of electrical thermal imaging inspections with the new ClirVu® IR Windows. Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance.
* No more removing the panel door for installation
* Work permit requirements and NFPA 70E processes are significantly reduced
* Full PPE is often not required so inspections are done faster and more comfortable
**Features:**
* Superior arc blast protection:
— High temperature silicon gaskets
— Mounting and door latches provide high pressure gasket compression
— Die cast components are manufactured with the highest strength alloys ZA-27 and EZAC
— Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile
* Torture Tested to the highest test ratings
— IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
* Quick and easy installation
— Installation takes 5 minutes with one technician
— Only one hole necessary with standard Greenlee® punch. Rear access required for punch connection only Easily accomplished with one technician
— Installs from front; no template needed; no rear access required
— Grounds instantly to metal enclosure with patent pending AutoGround™ process
— Sharp teeth on jam nuts assure four gas-tight ground connections
— All components have electrically conductive finishes for optimum grounding
* Quarter turn latch easily opens hinged cover
* Corrosion and UV resistance for challenging outdoor environments:
— All hardware is made from stainless steel or zinc plated steel
— Die cast components are plated with black chromium over high phosphorous Electroless nickel
* Three sizes 50 mm, 75 mm and 95 mm 2 in , 3 in and 4 in with the option of hand turn or security key door latches