MCB1114

LPC1114FBD48/302 Microcontroller Evaluation Board 50MHz CPU 8KB RAM 32KB Flash

is a Keil MCB1000 evaluation board which enables to create and test working programs based on the NXP LPC1114FBD48/302 ARM Cortex-M0 processor based device. The NXP LPC1114FBD48/302 microcontroller provided with the MCB1000 board is a high end Cortex-M device with advanced ADC and serial I/O capabilities. This device include a serial wire debug interface for downloading and debugging. They do not support a JTAG interface. A 12MHz crystal provides the clock signal for the CPU. The Cortex debug connector provides support for serial wire debug feature of the Cortex-M device. The MCB1000 board connects the on chip serial UART to the ST3232 which converts the logic signals to RS232 voltage levels.

.

50MHz ARM Cortex-M0 processor based MCU in 48 pin LQFP

.

Serial interface

.

Potentiometer for ADC input

.

Up to 42 GPIO

.

8 User LEDs + power

.

4 push buttons 2 GPIO, ISP, & reset

.

Power via USB connector

.

10 pin Cortex debug interface connector

Do not attach additional power supplies such as batteries while the USB supplies power to the MCB1000. This may harm the PC.