ADGM1004JCPZ-R2
0 Hz/DC to 13GHz, 2.5kV HBM ESD SP4T, MEMS Switch with Integrated Driver
Product Details
The ADGM1004 is a wideband, single-pole, four-throw SP4T switch, fabricated using Analog Devices, Inc., microelectro-mechanical system MEMS switch technology. This technology enables a small form factor, wide RF bandwidth, highly linear, low insertion loss switch that is operational down to 0 Hz/dc, making it an ideal solution for a wide range of RF and precision equipment switching needs.
An integrated control chip generates the high voltage necessary to electrostatically actuate the switch via a complementary metal-oxide semiconductor CMOS-/low voltage transistor-transistor logic LVTTL-compatible parallel interface. All four switches are independently controllable.
The device is packaged in a 24-lead, 5 mm × 4 mm × 1.45 mm lead frame chip-scale package LFCSP..
**Applications**
- .
- Relay replacements
- .
- Automatic test equipment ATE: RF/digital/mixed signals
- .
- Load / Probe Boards: RF/digital/mixed signals
- .
- Radio frequency RF test instrumentation
- .
- Reconfigurable filters/attenuators
- .
- High performance RF switching
### Features and Benefits
- .
- Fully operational down to 0 Hz/dc
- .
- On resistance: 1.8 Ω typical
- .
- Off leakage: 0.5 nA maximum
- .
- −3 dB bandwidth
- .
- 13 GHz typical for RF2, RF3
- .
- 10.8 GHz typical for RF1, RF4
- .
- RF performance characteristics
- .
- Insertion loss: 0.45 dB typical at 2.5 GHz
- .
- Isolation: 24 dB typical at 2.5 GHz
- .
- IIP3: 67 dBm typical
- .
- Radio frequency RF power: 32 dBm maximum
- .
- Actuation lifetime: 1 billion cycles minimum
- .
- Hermetically sealed switch contacts
- .
- On switching time: 30 μs typical
- .
- Electrostatic discharge ESD human body model HBM rating
- .
- 5 kV for RF1 to RF4 and RFC pins
- .
- 2.5 kV for all other pins
- .
- Integrated driver removes the need for an external driver
- .
- Supply voltage: 3.1 V to 3.3 V
- .
- CMOS/LVTTL compatible
- .
- Parallel interface
- .
- Independently controllable switches
- .
- 5 mm × 4 mm × 1.45 mm, 24-lead LFCSP