CP2615-EK

评估套件, CP2615 USB至I2S 音频桥接, 微型USB OTG & USB C型至USB-A适配器

The CP2615 USB AUDIO BRIDGE KIT from is a CP2615 digital audio bridge evaluation kit. This is designed to enable rapid development of mobile audio accessories and USB digital audio products using the CP2615 digital audio bridge. The CP2615 provides built-in support for USB digital audio streaming and HID user-interface functions for transport control buttons. It also provides an I/O protocol to allow host applications access to GPIO, ADC and serial interfaces. The CP2615 is designed to operate with any USB host that supports USB Audio class 1.0. No firmware development is required to use the CP2615 and it has many custom options that can be configured using a GUI configuration tool.

.

Supports USB HID consumer controls for volume and mute synchronization

.

Includes USB-UART bridge function

.

Supports 48KHz, 16bit/24bit stereo digital audio

.

Integrated USB transceiver, no external resistors required

.

Integrated clock, no external crystal required

.

On-chip voltage regulator of 3.45V output

.

Self-powered or bus-powered

.

No firmware development