B41231C0278M000

The Alaska® Ultra 88E1111 Gigabit Ethernet Transceiver is a physical layer device for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T applications. It is manufactured using standard digital CMOS process and contains all the active circuitry required to implement the physical layer functions to transmit and receive data on standard CAT 5 unshielded twisted pair. The 88E1111 device incorporates the Marvell Virtual Cable Tester® VCT™ feature, which uses Time Domain Reflectometry TDR technology for the remote identification of potential cable malfunctions, thus reducing equipment returns and service calls. Using VCT, the Alaska 88E1111 device detects and reports potential cabling issues such as pair swaps, pair polarity and excessive pair skew. The device will also detect cable opens, shorts or any impedance mismatch in the cable and report accurately within one meter the distance to the fault. The 88E1111 device supports the Gigabit Media Independent Interface GMII, Reduced GMII RGMII, Serial Gigabit Media Independent Interface SGMII, the Ten-Bit Interface TBI, and Reduced TBI RTBI for direct connection to a MAC/Switch port. The 88E1111 device incorporates an optional 1.25GHz SERDES Serializer/Deserializer. The serial interface may be connected directly to a fiber-optic transceiver for 1000BASE-T/1000BASE-X media conversion applications. Additionally, the 88E1111 device may be used to implement 1000BASE-T Gigabit Interface Converter GBIC or Small Form Factor Pluggable SFP modules. The 88E1111 device uses advanced mixed-signal processing to perform equalization, echo and crosstalk cancellation, data recovery, and error correction at a gigabit per second data rate. The device achieves robust performance in noisy environments with very low power dissipation. The 88E1111 device is offered in three different package options including a 117Pin TFBGA, a 96Pin BCC featuring a body size of only 9 x 9mm, and a 128 PQFP package.

2700 µF 80 V 铝电解器 径向，Can - 卡入式 - 85°C 时为 2000 小时

立创商城:
2700uF ±20% 80V

得捷:
CAP ALUM 2700UF 20% 80V SNAP

安富利:
The Alaska® Ultra 88E1111 Gigabit Ethernet Transceiver is a physical layer device for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T applications. It is manufactured using standard digital CMOS process and contains all the active circuitry required to implement the physical layer functions to transmit and receive data on standard CAT 5 unshielded twisted pair.The 88E1111 device incorporates the Marvell Virtual Cable Tester® VCT™ feature, which uses Time Domain Reflectometry TDR technology for the remote identification of potential cable malfunctions, thus reducing equipment returns and service calls. Using VCT, the Alaska 88E1111 device detects and reports potential cabling issues such as pair swaps, pair polarity and excessive pair skew. The device will also detect cable opens, shorts or any impedance mismatch in the cable and report accurately within one meter the distance to the fault. The 88E1111 device supports the Gigabit Media Independent Interface GMII, Reduced GMII RGMII, Serial Gigabit Media Independent Interface SGMII, the Ten-Bit Interface TBI, and Reduced TBI RTBI for direct connection to a MAC/Switch port.The 88E1111 device incorporates an optional 1.25 GHz SERDES Serializer/Deserializer. The serial interface may be connected directly to a fiber-optic transceiver for 1000BASE-T/1000BASE-X media conversion applications. Additionally, the 88E1111 device may be used to implement 1000BASE-T Gigabit Interface Converter GBIC or Small Form Factor Pluggable SFP modules.The 88E1111 device uses advanced mixed-signal processing to perform equalization, echo and crosstalk cancellation, data recovery, and error correction at a gigabit per second data rate. The device achieves robust performance in noisy environments with very low power dissipation.The 88E1111 device is offered in three different package options including a 117-Pin TFBGA, a 96-pin BCC featuring a body size of only 9 x 9 mm, and a 128 PQFP package.