LPC2144FBD64
NXP LPC2144FBD64 芯片, 32位微控制器, ARM7 128K闪存, LQFP64
The is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 128kB embedded high speed flash, 16kB on-chip SRAM, 16-channel 10-bit A/D converter, 10-bit D/A converter, three 32-bit timers, PWM channels and 45 general-purpose I/O pins.
- .
- In-system programming/In-application programming ISP/IAP
- .
- EmbeddedICE RT and embedded trace interfaces
- .
- USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM
- .
- Single 10-bit DAC provides variable analog output
- .
- Two 32-bit Timers/external event counters, PWM unit and watchdog
- .
- Low power real-time clock RTC with independent power and 32kHz clock input
- .
- Multiple serial interfaces including two UARTs 16C550, two Fast I2C-bus 400 Kbit/s, SPI and SSP
- .
- Vectored interrupt controller VIC with configurable priorities and vector addresses
- .
- Up to 45 of 5V tolerant fast general purpose I/O pins
- .
- Up to 21 external interrupt pins available
- .
- 60MHz Maximum CPU clock available from programmable on-chip PLL
- .
- On-chip integrated oscillator operates with an external crystal from 1MHz to 25MHz
- .
- Power saving modes include Idle and power-down
- .
- Individual enable/disable of peripheral functions as well as peripheral clock scaling
- .
- Processor wake-up from Power-down mode via external interrupt or BOD
- .
- Single power supply chip with POR and BOD circuits