TOC_ABC2

SGLUX  TOC_ABC2  光电探测器, 紫外线-宽频 , 180NW/CM?

The is a Broadband SiC-based UV Photodetector with integrated amplifier. The TOCON_ABC2 5V powered UV photodetector converts UV radiation into a 0 to 5V voltage output. The Vout pin of the TOCON can be directly connected to a controller, a voltmeter or any other data analysing device with voltage input. Highly modern electronic components and a hermetically sealed metal housing with UV glass window to eliminate noise caused by parasitic resistance paths inside the package or EMI. A TOCON is a perfect solution for each industrial UV sensing application starting from flame detection at pW/cm² level up to UV curing lamp control at W/cm² level. This thirteen orders of magnitude range is covered by ten different TOCONs that differ by their sensitivity. The TOCONs are produced as UV broadband sensors or with filters for selective measurement.

.

Hermetically sealed metal housing with concentrator lens cap, suited for flame detection

.

UV broadband UVA+UVB+UVC

.

0 to 5V Signal output

.

180nW/cm² Maximum irradiance saturation limit at 280nm peak wavelength

.

18pW/cm² Minimum irradiance resolution limit

.

For low UV radiation and occupational safety