LX5530LQ

的InGaP HBT 4.5 - 6.0GHz功率放大器 InGaP HBT 4.5 - 6.0GHz Power Amplifier

DESCRIPTION

The LX5530 is a power amplifier optimized for the FCC Unlicensed National Information Infrastructure U-NII band, HyperLAN2 and Japan WLAN applications in the 4.9 – 5.9 GHz frequency range. The PA is implemented as a three-stage monolithic microwave integrated circuit MMIC with active bias, on-chip input matching and output pre-matching. The device is manufactured with an InGaP/GaAs Heterojunction Bipolar Transistor HBT IC process MOCVD. It operates with a single positive voltage supply of 3 – 5V, with high power gain of up to 33dB. When operated at 5V supply voltage, it provides up to +25dBm linear output power for 802.11a OFDM spectrum mask compliance, and low EVM of 3% for up to +23dBm output power in the 4.9-5.9GHz band.

KEY FEATURES

Broadband 4.9 – 5.9GHz Operation

Advanced InGaP HBT

Single-Polarity 3 – 5V Supply

Power Gain up to ~ 33dB for VC=5V, Icq = 250mA

Power Gain > ~28dB across 4.9- 5.85GHz

OFDM Mask Compliance Power Pout ~ +25dBm over 4.9- 5.85GHz ACPR ~ -50dBc @ ±30MHz Offset

Pout up to +23dBm with EVM ~3% VC = 5V

EVM < ~2.5% for Pout=+21dBm across 4.9-5.85GHz VC = 5V

EVM < ~2.5% for Pout=+19dBm across 4.9-5.85GHz VC = 4V

Total Current ~250mA for Pout =+20dBm, Duty Cycle = 99%VC= 4V

Complete On-Chip Input Match

Simple Output Match for Optimal Broadband EVM

On-Chip RF Decoupling

Temperature-Compensated On-Chip Output Power Detector with Wide Dynamic Range

Small Footprint: 3x3mm

Low Profile: 0.9mm

APPLICATIONS

FCC U-NII Wireless

IEEE 802.11a

HiperLAN2

5GHz Cordless Phone

IEEE 802.16 WiMAX