MSP430F6726IPZR

混合信号微控制器 MIXED SIGNAL MICROCONTROLLER

* Low Supply Voltage Range: 3.6 V Down to 1.8 V * Ultra-Low Power Consumption * Active Mode AM: All System Clocks Active 265 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution Typical 140 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution Typical * Standby Mode LPM3: Real-Time Clock With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.7 µA at 2.2 V, 2.5 µA at 3.0 V Typical * Off Mode LPM4: Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up: 1.6 µA at 3.0 V Typical * Shutdown RTC Mode LPM3.5: Shutdown Mode, Active Real-Time Clock RTC With Crystal: 1.24 µA at 3.0 V Typical * Shutdown Mode LPM4.5: 0.78 µA at 3.0 V Typical * Wake-Up From Standby Mode in 3 µs Typical * 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock * Flexible Power Management System * Fully Integrated LDO With Programmable Regulated Core Supply Voltage * Supply Voltage Supervision, Monitoring, and Brownout * System Operation From up to Two Auxiliary Power Supplies * Unified Clock System * FLL Control Loop for Frequency Stabilization * Low-Power Low-Frequency Internal Clock Source VLO * Low-Frequency Trimmed Internal Reference Source REFO * 32-kHz Crystals XT1 * One 16-Bit Timer With Three Capture/Compare Registers * Three 16-Bit Timers With Two Capture/Compare Registers Each * Enhanced Universal Serial Communication Interfaces * eUSCI_A0, eUSCI_A1, and eUSCI_A2: Enhanced UART Supports Auto-Baudrate Detection, IrDA Encoder and Decoder, Synchronous SPI * eUSCI_B0: I2C With Multi-Slave Addressing, Synchronous SPI * Password-Protected RTC With Crystal Offset Calibration and TemperatureCompensation * Separate Voltage Supply for Backup Subsystem * 32-kHz Low-Frequency Oscillator XT1 * Real-Time Clock * Backup Memory 4 x 16 Bits * Three 24-Bit Sigma-Delta Analog-to-Digital A/D Converters With Differential PGA Inputs * Integrated LCD Driver With Contrast Control for up to 320 Segments in 8-Mux Mode * Hardware Multiplier Supports 32-Bit Operations * 10-Bit 200-ksps A/D Converter * Internal Reference * Sample-and-Hold, Autoscan Feature * Up to Six External Channels, Two Internal Channels, Including Temperature Sensor * Three-Channel Internal DMA * Serial Onboard Programming, No External Programming Voltage Needed * Available in 100-Pin and 80-Pin LQFP Packages