XBP24BZ7UITB003
Zigbee / 802.15.4 Modules & Development Tools 0.063W1/16W, UFL ant 0.063W1/16W, UFL ant,
* Indoor/urban: up to 300’ 90 m, 200" 60 m for International variant * Outdoor line-of-sight: up to 2 miles 3200 m, 5000" 1500 m for International variant * Transmit power: 63mW 18dBm, 10mW 10dBm for International variant * Receiver sensitivity: -102 dBm
艾睿:
ZigBee Embedded RF Module Family For OEMs
安富利:
This manual describes the operation of the XBee/XBee-PRO ZB RF module, which consists of ZigBee firmware loaded onto XBee S2 and S2B hardware, models: XBEE2, XBEEPRO2 and PRO S2B. The XBee/XBee-PRO ZB RF Modules are designed to operate within the ZigBee protocol and support the unique needs of low-cost, low-power wireless sensor networks. The modules require minimal power and provide reliable delivery of data between remote devices.The XBee/XBee-PRO ZB firmware release can be installed on XBee ZNet or ZB modules. The XBee ZB firmware is based on the EmberZNet 3.x ZigBee PRO Feature Set mesh networking stack, while the XBee ZNet 2.5 firmware is based on Ember"s proprietary “designed for ZigBee” mesh stack EmberZNet 2.5.x. ZB and ZNet 2.5 firmware are similar in nature, but not over-the-air compatible. Devices running ZNet 2.5 firmware cannot communicate with devices running the ZB firmware.
