TAS5716

具有扬声器均衡、DRC 和 3D/低音升压的 20W 立体声闭环 12S 音频放大器

The is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5716 is a slave-only device receiving all clocks from external sources. The TAS5716 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

.

Audio Input/Output

.

20-W into an 8-Ω Load From an 18-V Supply

.

Two Serial Audio Inputs Four Audio Channels

.

Supports Multiple Output Configurations:

.

2-Ch Bridged Outputs 20 W × 2

.

4-Ch Single-Ended Outputs 10 W × 4

.

2-Ch Single-Ended + 1-Ch Bridged 2.1 10 W × 2 + 20 W

.

Closed Loop Power Stage Architecture

.

Improved PSRR Reduces Power Supply Performance Requirements

.

Higher Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response

.

Constant Output Power Over Variation in Supply

.

Wide PVCC Range From 10 V to 26 V

.

No Separate Supply Required for Gate Drive

.

Supports 32-kHz—192-kHz Sample Rates LJ/RJ/I2S

.

Headphone PWM Outputs

.

Subwoofer PWM Outputs

.

AM Interference Avoidance Support

.

Audio/PWM Processing

.

Independent Channel Volume Controls With 24-dB to -100-dB Range—Soft Mute 50% Duty Cycle

.

Programmable Dynamic Range Control

.

16 Programmable Biquads for Speaker Equalization

.

Adaptive Biquad Coefficients for EQ and DRC Filters

.

Programmable Input and Output Mixers

.

Loudness Compensation for Subwoofer

.

Automatic Sample-Rate Detection and Coefficient Banking

.

3D Support

.

Pseudo-Bass Support

.

General Features

.

Serial Control Interface Operational Without MCLK

.

Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal

.

Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package

.

Thermal and Short-Circuit Protection