ADG904BCPZ

ANALOG DEVICES  ADG904BCPZ  芯片, 射频开关, 4:1多路复用器/SP4T, 2GHZ, LFCSP-20

单电源 1.65V 至 5.5V 开关和多路复用器，Analog Devices

低接通电阻

低失真

高速切换

低泄漏

低功率

### 开关和多路复用器，Analog Devices

得捷:
IC MULTIPLEXER 4X1 20LFCSP

欧时:
单电源 1.65V 至 5.5V 开关和多路复用器，Analog Devices低接通电阻 低失真 高速切换 低泄漏 低功率### 开关和多路复用器，Analog Devices

立创商城:
ADG904BCPZ

贸泽:
RF Switch ICs WB 2.5GHz 37dB Iso CMOS 4:1 Mux/SP4T

艾睿:
RF Switch SP4T 0MHz to 2.5GHz 37dB 20-Pin LFCSP EP Tray

安富利:
The ADG904 is wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are designed such that the isolation is high over the dc to 1 GHz frequency range.The ADG904 is switch one of four inputs to a common output, RFC, as determined by the 3-bit binary address lines A0, A1, and EN. A Logic 1 on the EN pin disables the device.The parts have on-board CMOS control logic, which eliminates the need for external control circuitry. The control inputs are both CMOS and LVTTL compatible. The low power consumption of these devices makes them ideally suited for wireless applications and general-purpose high frequency switching.

Chip1Stop:
Analog Multiplexer Single 4:1 20-Pin LFCSP EP Tray

Verical:
RF Switch SP4T 0MHz to 2.5GHz 37dB 20-Pin LFCSP EP Tray

Newark:
# ANALOG DEVICES  ADG904BCPZ  RF SWITCH, 4:1MUX/SP4T, 2GHZ, LFCSP-20

罗切斯特:
Wideband 2.5 GHz, 37DB Isolation AT 1 GHz, CMOS 1.65V to 2.75V, 4:1 MUX/SP4T