LP3875

1.5A 快速超低压降线性稳压器

The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions.

**Dropout Voltage:** Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current.

**Ground Pin Current:** Typically 6 mA at 1.5-A load current.

**Shutdown Mode:** Typically 10-nA quiescent current when the SD pin is pulled low.

**ERROR Flag: **ERROR flag goes low when the output voltage drops 10% below nominal value LP3872 only.

**SENSE:** Sense pin improves regulation at remote loads LP3875 only.

**Precision Output Voltage:** Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions varying line, load, and temperature.

.

Input Voltage Range: 2.5 V to 7 V

.

Ultra Low-Dropout Voltage

.

Low Ground Pin Current

.

Load Regulation of 0.06%

.

10-nA Quiescent Current in Shutdown Mode

.

Ensured Output Current of 1.5-A DC

.

Available in DDPAK/TO-263, TO-220, and

SOT-223 Packages

.

Output Voltage Accuracy ±1.5%

.

ERROR Flag for Output Status

.

Sense Option Improves Load Regulation

.

Minimum Output Capacitor Requirements

.

Overtemperature/Overcurrent Protection

.

−40°C to 125°C Junction Temperature Range