AFE4300PNR
低成本,集成模拟前端的重量,规模和体成分测量 Low-Cost, Integrated Analog Front-End for Weight-Scale and Body Composition Measurement
The AFE4300 is a low-cost analog front-end incorporating two separate signal chains: one chain for weight-scale WS measurement and the other for body composition measurement BCM analysis. A 16-bit, 860-SPS analog-to-digital converter ADC is multiplexed between both chains. The weight measurement chain includes an instrumentation amplifier INA with the gain set by an external resistor, followed by a 6-bit digital-to-analog converter DAC for offset correction, and a circuit to drive the external bridge/load cell with a fixed 1.7 V for ratiometric measurements.
The AFE4300 can also measure body composition by applying a sinusoidal current into the body. The sinusoidal current is generated with an internal pattern generator and a 6-bit, 1-MSPS DAC. A voltage-to-current converter applies this sinusoidal current into the body, between two terminals. The voltage created across these two terminals as a result of the impedance of the body is measured back with a differential amplifier, rectified, and its amplitude is extracted and measured by the 16-bit ADC.
The AFE4300 operates from 2 V to 3.6 V, is specified from 0°C to +70°C, and is available in a TQFP-80 package.