AD7403-8BRIZ-RL7

Single Channel Single ADC Delta-Sigma 20MSPS 16Bit Serial Medical 8Pin SOIC W T/R

Product Details

The AD7403 is a high performance, second-order, Σ-Δ modulator that converts an analog input signal into a high speed, single-bit data stream, with on-chip digital isolation based on Analog Devices, Inc., _i_Coupler® technology. The AD7403 operates from a 5 V VDD1 power supply and accepts a differential input signal of ±250 mV ±320 mV full-scale. The differential input is ideally suited to shunt voltage monitoring in high voltage applications where galvanic isolation is required.

The analog input is continuously sampled by a high performance analog modulator, and converted to a ones density digital output stream with a data rate of up to 20 MHz. The original information can be reconstructed with an appropriate digital filter to achieve 88 dB signal to noise ratio SNR at  78.1 kSPS. The serial input/output can use a 5 V or a 3 V supply VDD2.

The serial interface is digitally isolated. High speed complementary metal oxide semiconductor CMOS technology, combined with monolithic transformer technology, means the on-chip isolation provides outstanding performance characteristics, superior to alternatives such as optocoupler devices. The AD7403 device is offered in a 16-lead, wide-body SOIC package and has an oper-ating temperature range of −40°C to +125°C. The AD7403-8 device is offered in an 8-lead, wide-body SOIC package and has an operating temperature range of −40°C to +105°C.

**Applications**

.

Shunt current monitoring

.

AC motor controls

.

Power and solar inverters

.

Wind turbine inverters

.

Data acquisition systems

.

Analog-to-digital and opto-isolator replacements

### Features and Benefits

.

5 MHz to 20 MHz external clock input rate

.

16 bits, no missing codes

.

Signal to noise ratio SNR: 88 dB typical

.

Effective number of bits ENOB: 14.2 bits typical

.

Typical offset drift vs. temperature: 1.6 μV/°C typical

.

On-board digital isolator

.

On-board reference

.

See data sheet for additional features

**AD7403-EP supports defense and aerospace applications AQEC standard**

.

Download AD7403-EP data sheet

.

Military temperature range: −55°C to +125°C

.

Controlled manufacturing baseline

.

One assembly/test site

.

One fabrication site

.

Enhanced product change notification

.

Qualification data available on request

.

V62/16625 DSCC Drawing Number