LPC11A12FBD48/101

NXP  LPC11A12FBD48/101  微控制器, 32位, 低功率, ARM 皮质-M0, 50 MHz, 16 KB, 4 KB, 48 引脚, LQFP

The is a 32-bit Low-power Microcontroller based on ARM Cortex-M0 core with RISC architecture operates at a maximum frequency of 50MHz. Analog/mixed-signal subsystems can be configured by software from interconnected digital and analog peripherals. The device incorporates 16kB internal flash, 4kB internal RAM, 1kB EEPROM, four general purpose counters/timers, 8-channel 10-bit A/D converter with sample rates of up to 400ksps, an analog comparator, a temperature sensor, an internal voltage reference and 42 general-purpose I/O pins. This device also features peripherals like one USART, one inter-integrated circuit I2C and two serial peripheral interface SPI modules.

.

ARM Cortex-M0 built-in nested vectored interrupt controller NVIC

.

Serial wire debug SWD

.

JTAG boundary scan

.

System tick timer

.

In-system programming ISP

.

Includes ROM-based 32-bit integer division and I2C-bus driver routines

.

GPIO pins can be used as edge and level sensitive interrupt sources

.

High-current source output driver 20mA on one pin

.

High-current sink driver 20mA on true open-drain pins

.

Programmable windowed watchdog timer WWDT

.

10-bit ADC with input multiplexing among 8 pins

.

10-bit DAC with flexible conversion triggering

.

Highly flexible analog comparator with a programmable voltage reference

.

Under voltage lockout UVLO protection

.

Crystal oscillator SysOsc with an operating range of 1MHz to 25MHz

.

12MHz Internal RC oscillator IRC trimmed to 1% accuracy

.

Internal low-power, low-frequency oscillator LFOsc

.

Clock input for external system clock 25MHz typical

.

PLL allows CPU operation up to the maximum CPU rate

.

Clock output function with divider