6532-200M

Deadweight Tester; Electronic; Bench; 2to 200 Mpa; Built-in Priming

A powerful, complete hydraulic pressure calibration system to cover a wide workload

A modern alternative to the traditional deadweight tester

E-DWT-H breaks new ground in dead weight tester calibration, improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical, piston-cylinder and weight based deadweight testers. It’s a lighter, easier-to-use deadweight tester calibration alternative that is at home in the lab or instrument shop, as well as in the field performing in-situ calibrations and tests. This complete hydraulic pressure calibration system combines the convenience and precision of continuous, realtime electronic pressure measurement with the simple and direct operation of high quality operator controlled pressure generation hardware.

**Features**

* 0 MPa to 70 MPa 10 000 psi range

* ± 0.1 % of reading measurement uncertainty from 1 % to 100 % of range

* Not dependent on local gravity or ambient temperature

* Sets and reads any pressure value directly in any unit of measure, without moving weights

* Built-in filling and priming system

* Ready indication based on pressure stability

* Electronic output allows automated data collection using calibration software

* Compact and transportable—rechargeable battery pack for 8 hours of field operation

* Selected by the US Air Force to replace conventional, mass/piston-cylinder based deadweight testers