PD69208MILQ-TR

Power Over Ethernet PSE Controller 32V 57V 56Pin QFN EP

’s™ PD69208M Power over Ethernet PoE and Power over HDBaseT PoH Manager chip integrates power, analog, and state of the art Logic into a single 56-pin, plastic QFN package. The device is used in Ethernet switches and Midspans to allow network devices to share power and data over the same cable.

PD69208M device is an 8 ports, mixed-signal, high voltage PoE/PoH PSE Manager. The PD69208M supports standard PD Powered Device detection, power-up, and protection according to IEEE802.3 and the HDBaseT standards as well as legacy/pre-standard PD detection. The PD69208M provides PD real time protection through the following mechanisms: overload, under-load, over-voltage, over temperature, and short-circuit and enables operation in a total standalone mode, with no need for interaction by the host processor. The PD69208 executes all real time functions as specified in IEEE802.3at High Power “AT” and PoH standards, including load detection, “AF”, “AT”, and PoH classification; using Multiple Classification Attempts MCA. The PD69208M supports supply voltages between 32V and 57V with no need of additional power supply sources. A system that powers over 4 pairs twin PSE can be implemented, based on 2 ports of PD69208M – enabling an extra feature for simple and low cost high power PD device. PD69208M support up to Type-3 PSE 60W. An on-going monitoring of system parameters for the host software is available. Internal thermal protection is implemented in the chip. PD69208M is a low power device that uses internal MOSFETs and internal sense resistors.