FLUKE 805 FC
Fluke Connect 805 测振仪 Fluke 805 测振仪设计用于需要可靠、可重复测量的应用。 借助波峰因子和直接传感器尖端测量(4,000Hz 至 20,000Hz)提供极其可靠的轴承组件。 同时也是评估和测量风扇、冷却塔、变速箱、泵和许多其它应用的理想选择。 Fluke CONNECT™ 随附 USB 电缆、存储箱、皮套、快速参考、导柱、CD-ROM(包括 MS Excel 模板)及 2 节 AA 电池。 振动测量
The is a Vibration Meter is an innovative sensor design minimizes measurement variations caused by device angle or contact pressure, consistent data quality at both low and high frequency ranges, four-level severity scale assesses urgency of problems for overall vibration and bearing condition, exportable data via USB, trending in Microsoft® Excel using built-in templates, overall vibration measurement 10 to 1000Hz for acceleration, velocity and displacement units of measurement for a wide variety of machines, crest factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4000 and 20000Hz. Coloured lighting system green, red and on-screen comments indicate how much pressure needs to be applied to take measurements. Temperature measurement with spot IR sensor increases diagnostic capabilities.
- .
- External accelerometer support for hard to reach locations
- .
- Flashlight for viewing measurement locations in dark areas
- .
- Large screen with high resolution for easy navigation and viewing
- .
- On-board memory holds and saves up to 3500 measurements
- .
- Audio output for listening to bearing tones directly
- .
- 50g Peak vibration limit
- .
- 16-bit A/D converter
- .
- 80dB Signal to noise ratio
- .
- 0.01 to 50g Measurement range
- .
- 0.01g Resolution range
- .
- -20 to 50°C Operating temperature range
- .
- IP54 Protection