74ACT11373

具有三态输出的八路透明 D 类锁存器

This 8-bit latch features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight latches of the are transparent D-type latches. While the latch-enable LE input is high, the Q outputs follow the data D inputs. When the enable is taken low, the Q outputs are latched at the levels that were set up at the D inputs.

A buffered output-enable input can be used to place the eight outputs in either a normal logic state high or low logic levels or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impendance third state and increased drive provide the capability to drive the bus lines in a bus-organized system without need for interface or pullup components.

does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are off.

The 74ACT11373 is characterized for operation from -40°C to 85°C.

 

 

.

Eight Latches in a Single Package

.

3-State Bus Driving True Outputs

.

Full Parallel Access for Loading

.

Buffered Input and Output-Enable Pins

.

Inputs Are TTL-Voltage Compatible

.

Flow-Through Architecture Optimizes PCB Layout

.

Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise

.

EPICTM Enhanced-Performance Implanted CMOS 1-m Process

.

500-mA Typical Latch-Up Immunity at 125°C

.

Package Options Include Plastic Small-Outline DW and Shrink Small-Outline DB Packages, and Standard Plastic 300-mil DIPs NT

 

EPIC is a trademark of Texas Instruments Incorporated.