FS1.0.1L.195

IST INNOVATIVE SENSOR TECHNOLOGY  FS1.0.1L.195  电流传感器气体

The from IST Innovative Sensor Technology is a thermal mass flow sensor for gas flow applications. The flow sensor element consists of two temperature depending platinum resistors deposited on one chip. The low ohm resistor with a small area is used as a heater, whereas the other high ohm resistor serves to measure the reference temperature. Using a bridge circuit, the differing resistance value of two elements leads to different self heating. The self heating is dependent upon the applied voltage, the mass flow and the media in which the sensor is located. Higher voltage increases self heating, a higher flow rate increases cooling. If the self heating is kept constantly by a suitable controller, the voltage increases with higher flow rates and therefore becomes a measure for the mass flow. As a result of this little thermal mass, this sensor has fast heating and cooling response times.

.

Simple signal processing and calibration

.

No mechanical moving components

.

Excellent reproducibility

.

Excellent long term stability

.

Measuring range 0m/s to 100 m/s

.

Available with a plastic housing ofØ6mm

.

Temperature range from -20°C to 150°C

.

3 pins, leads 30AWG, insulated with PTFE

.

Response sensitivity is 0.01m/s and Response time is 2s

.

Operating voltage range from 2V to 5V at dT = 10 K