DM9161BEP
DAVICOM DM9161BEP 芯片, 收发器, 10/100MBPS, 以太网物理层, 48LQFP
The is a physical layer single-chip and Low Power Transceiver for 100BASE-TX and 10BASE-T operations. On the media side, it provides a direct interface either to Unshielded Twisted Pair Category 5 Cable UTP5 for 100BASE-TX Fast Ethernet or UTP5/UTP3 Cable for 10BASE-T Ethernet. Through the Media Independent Interface MII, the DM9161B connects to the Medium Access Control MAC layer, ensuring a high inter operability from different vendors. The DM9161B uses a low power and high performance advanced CMOS process. It contains the entire physical layer functions of 100BASE-TX as defined by IEEE802.3u, including the Physical Coding Sub layer PCS, Physical Medium Attachment PMA, Twisted Pair Physical Medium Dependent Sub layer TP-PMD, 10BASE-TX Encoder/Decoder ENC/DEC and Twisted Pair Media Access Unit TPMAU. The DM9161B provides a strong support for the auto-negotiation function, utilizing automatic media speed and protocol selection.
- .
- Fully comply with IEEE 802.3/IEEE 802.3u 10Base-T/100Base-TX, ANSI X3T12 TP-PMD 1995 standard
- .
- Support HP MDI/MDI-X auto crossover function HP Auto-MDIX
- .
- Support auto-negotiation function, compliant with IEEE 802.3u
- .
- Fully integrated physical layer transceiver on-chip filtering with direct interface
- .
- Selectable repeater or node mode
- .
- Selectable MII or RMII reduced MII mode for 100Base-TX and 10Base-TX
- .
- Selectable MII or GPSI 7-wired mode for 10Base-T
- .
- Selectable full-duplex or half-duplex operation
- .
- MII management interface with mask able interrupt output capability
- .
- Provides loopback mode for easy system diagnostics
- .
- LED status outputs indicate link/activity, speed 10/100 and full-duplex/collision
- .
- Support dual-LED optional control
- .
- Single low power supply of 3.3V with an advanced CMOS technology
- .
- Compatible with 3.3 and 5.0V tolerant I/Os
- .
- Pin to pin compatible with DM9161A
- .
- DSP architecture PHY transceiver