UC3525ANG4
TEXAS INSTRUMENTS UC3525ANG4 控制器, PWM, 35V-4.5V电源, 500 kHz, 19V/100mA输出, DIP-16
The is a Regulating Pulse Width Modulator designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip +5.1V reference is trimmed to ±1% and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provides a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands.
- .
- 8 to 35V Operation
- .
- 5.1V Reference trimmed to ±1%
- .
- 100Hz to 500kHz Oscillator range
- .
- Separate oscillator sync terminal
- .
- Adjustable dead time control
- .
- Internal soft-start
- .
- Pulse-by-pulse shutdown
- .
- Input under-voltage lockout with hysteresis
- .
- Latching PWM to prevent multiple pulses
- .
- Dual source/sink output drivers
- .
- Green product and no Sb/Br
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.