DT7926-XJ

EXTREME 2 29 件装钻头套件金属尖端接触到工作面时即开始钻孔，无需准备干净和精确的孔（仅限直径为 3.2mm 及以上） EXTREME 2 钻头比标准 HSS-R 砖头的速度快 4 倍，强度增加 50% 清洁剂、提供更加准确、无毛刺孔，由于凹入式切割翼 ### 高速钢 - 塑料盒

* Extreme 2™ metal tip drills on contact, eliminating "walking" for accurate holes Ø 3.2mm and over

.

Innovative tapered web greatly reduces breakage

.

No-slip shank with 3 flats eliminates slipping in the chuck Ø 5.0mm and above only

.

Permanent size markings located above the shank for increased visibility Ø 3.0mm and above only

.

Up to 4 times faster drilling than standard HSS-R drill bits

.

Suitable for portable drilling of steel, alloyed and non-alloyed up to 900 N/mm²

.

For drilling sheet or thin materials where accurate burr-free holes are required

.

Also suitable for use in wood and plastics