UC37136MG4

双路输出开关 DUAL OUTPUT SWITCH

description

The UCx7136 bipolar dual switch contains all the control and drive circuitry required to drive resistive,

capacitive, and inductive loads as in industrial sensor applications. The output drivers are 250-mA NPN power switches that can switch a load between a voltage supply up to 35 V and GND with a continuous output current rating of 250 mA, combined or individually. Internal 46-V Zener clamps are provided to clamp collector-to-emitter NPN power switch voltages to safe levels when driving inductive loads.

250-mA Continuous Total Output Drive

Two Output Power Switches, 35-V Maximum Operation

Low-Side or High-Side Switch Configuration

User Programmable Phasing of Output Switch LS2/HS2

Internal Output Voltage Clamp for Driving Inductive Loads

9 V to 35 V Supply Voltage Range

Current Limit Protection

Thermal Shutdown Protection

UVLO With User Programmable Time Delay