CAT5241YI-25

四路数字可编程电位计与64丝锥和I²C接口 Quad Digitally Programmable Potentiometer with 64 Taps and I²C Interface

DESCRIPTION

The CAT5241 is four Digitally Programmable Potentiometers DPPs™ integrated with control logic

and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected

between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A separate

FEATURES

Four linear-taper digitally programmable potentiometers

64 resistor taps per potentiometer

End to end resistance 2.5 kΩ, 10 kΩ, 50 kΩ or 100 kΩ

Potentiometer control and memory access via I²C interface

Low wiper resistance, typically 80 Ω

Nonvolatile memory storage for up to four wiper settings for each potentiometer

Automatic recall of saved wiper settings at power up

2.5 to 6.0 volt operation

Standby current less than 1 µA

1,000,000 nonvolatile WRITE cycles

100 year nonvolatile memory data retention

20-lead SOIC and TSSOP packages

Industrial temperature range