OPA4820
四路、单位增益、低噪声、电压反馈运算放大器
The provides a wideband, unity-gain stable, voltage-feedback amplifier with a very low input noise voltage and high output current using a low 5.7mA/ch supply current. At unity-gain, the OPA4820 gives > 600MHz bandwidth with < 1 dB peaking. The OPA4820 complements this high-speed operation with excellent DC precision in a low-power device. A worst-case input offset voltage of ±0.8mV and an offset current of ±500nA give excellent absolute DC precision for pulse amplifier applications.
Minimal input and output voltage swing headroom allow the OPA4820 to operate on a single +5V supply with > 2VPP output swing. While not a rail-to-rail RR output, this swing will support most emerging analog-to-digital converter ADC input ranges with lower power and noise than typical RR output op amps.
Exceptionally low dG/dP 0.01%/0.03° supports low-cost composite video line driver applications. Existing designs can use the industry-standard quad pinout SO-14 package while emerging high-density portable applications can use the TSSOP-14.
- .
- HIGH BANDWIDTH: 220MHz G = +2
- .
- HIGH OUTPUT CURRENT: ±85mA
- .
- LOW INPUT NOISE: 2.5nV/Hz
- .
- LOW SUPPLY CURRENT: 5.7mA/ch
- .
- FLEXIBLE SUPPLY VOLTAGE:
±2V to ±6.3V Dual Supply
+4V to +12.6V Single Supply
- .
- EXCELLENT DC ACCURACY:
- .
- Maximum 25°C Input Offset Voltage = 0.8mV
- .
- Maximum 25°C Input Offset Current = 500nA
- .
- APPLICA ONS
- .
- LOWCOST VIDEO LINE DRIVERS
- .
- ADC PREAMPS
- .
- ACTIVE FILTERS
- .
- LOWNOISE INTEGRATORS
- .
- PORTABLE TEST EQUIPMENT
- .
- OPTICAL CHANNEL AMPLIFIERS
- .
- LOWPOWER, BASEBAND AMPLIFIERS
- .
- CCD IMAGING CHANNEL AMPLIFIERS
- .
- OPA4650 UPGRADE
All trademarks are the property of their respective owners.