TAS5342A

100W 立体声数字放大器功率级

The is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load BTL at up to 100 W per channel with low-harmonic distortion, low-integrated noise, and low-idle current.

The TAS5342A has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal PWM activity detector.

A power-on-reset POR circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.

.

Total Power Output Bridge Tied Load

.

2 × 100 W at 10% THD+N Into 4 Ω

.

2 × 80 W at 10% THD+N Into 6 Ω

.

2 × 65 W at 10% THD+N Into 8 Ω

.

Total Power Output Single Ended

.

4 × 40 W at 10% THD+N Into 3 Ω

.

4 × 30 W at 10% THD+N Into 4 Ω

.

Total Power Output Parallel Mode

.

1 × 200 W at 10% THD+N Into 2 Ω

.

1 × 160 W at 10% THD+N Into 3 Ω

.

>110 dB SNR A-Weighted With TAS5518 Modulator

.

<0.1% THD+N 1 W, 1 kHz

.

Supports PWM Frame Rates of 192 kHz to 432 kHz

.

Resistor-Programmable Current Limit

.

Integrated Self-Protection Circuitry, Including:

.

Under Voltage Protection

.

Overtemperature Warning and Error

.

Overload Protection

.

Short-Circuit Protection

.

PWM Activity Detector

.

Standalone Protection Recovery

.

Power-On Reset POR to Eliminate System Power-Supply Sequencing

.

High-Efficiency Power Stage >90% With 80-mΩ Output MOSFETs

.

Thermally Enhanced Package 44-Pin HTSSOP DDV

.

Error Reporting, 3.3-V and 5-V Compliant

.

EMI Compliant When Used With Recommended System Design