USB3311C-CP-TR

Hi-Speed USB Transceiver with 1.8V ULPI Interface - 26MHz Reference Clock

Transceiver USB 2.0 24-QFN-EP 4x4

得捷:
IC TRANSCEIVER USB FLEX 24QFN

立创商城:
USB3311C-CP-TR

贸泽:
USB Interface IC High Speed USB 1.8V ULPI

艾睿:
USB Transceiver 1TR 24-Pin PQFN T/R

安富利:
The USB3311 is a highly integrated Hi-Speed USB 2.0 Transceiver PHY that supports systems architectures based on a 26MHz reference clock. It is designed to be used in both commercial and industrial temperature applications.The USB3311 meets all of the electrical requirements to be used as a Hi-Speed USB Host, Device, or an On-the-Go OTG device. In addition to the supporting USB signaling the USB3311 also provides USB UART mode and USB Audio mode.USB3311 uses the industry standard UTMI+ Low Pin Interface ULPI to connect the USB PHY to the Link. The industry standard ULPI interface uses a method of in-band signaling and status byte transfers between the Link and PHY, to facilitate a USB session. By using in-band signaling and status byte transfers the ULPI interface requires only 12 pins.The USB3311 uses SMSC’s “wrapper-less” technology to implement the ULPI interface. This “wrapperless” technology allows the PHY to achieve a low latency transmit and receive time. SMSC’s low latency transceiver allows an existing UTMI Link to be reused by adding a UTMI to ULPI bridge. By adding a bridge to the ASIC the existing and proven UTMI Link IP can be reused.

Chip1Stop:
USB Transceiver 1TR 24-Pin PQFN T/R

Verical:
USB Transceiver 1TR 24-Pin PQFN T/R