ADP5034AREZ-1-R7
Buck Regulator with LDO 2.3V to 5.5V 28Pin TSSOP EP T/R
Product Details
The ADP5034 combines two high performance buck regulators and two low dropout LDO regulators in a small, 24-lead 4 mm × 4 mm LFCSP QFN to meet demanding performance and board space requirements.
The high switching frequency of the buck regulators enables tiny multilayer external components and minimizes the board space. When the MODE pin is set high, the buck regulators operate in forced PWM mode. When the MODE pin is set low, the buck regulators operate in PWM mode when the load is around the nominal value. When the load current falls below a predefined threshold, the regulator operates in power save mode PSM, improving the light-load efficiency.
The two bucks operate out of phase to reduce the input capaci-tor requirement. The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5034 LDOs extend the battery life of portable devices. The ADP5034 LDOs maintain power supply rejection greater than 60 dB for frequencies as high as 10 kHz while operating with a low headroom voltage.
Regulators in the ADP5034 are activated though dedicated enable pins. The default output voltages can be externally set in the adjustable version, or factory programmable in the fixed voltage version, and can be set to a wide range of preset values
**APPLICATIONS**
- .
- Power for processors, ASICS, FPGAs, and RF chipsets
- .
- Portable instrumentation and medical devices
- .
- Space constrained devices
### Features and Benefits
- .
- Main input voltage range: 2.3 V to 5.5 V
- .
- Two 1200 mA buck regulators and two 300 mA LDOs
- .
- 24-lead, 4 mm × 4 mm LFCSP or 28-lead TSSOP package
- .
- Regulator accuracy: ±1.8%
- .
- Factory programmable or external adjustable VOUTx
- .
- 3 MHz buck operation with forced PWM and auto PWM/PSM modes
- .
- BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V
- .
- LDO1/LDO2: output voltage range from 0.8 V to 5.2 V
- .
- LDO1/LDO2: input supply voltage from 1.7 V to 5.5 V
- .
- LDO1/LDO2: high PSRR and low output noise
