ADZS-ENCODE-EX3

Expansion Board, Multi-Format Video Encoder/Decoder, Plugs into EI3 of EZ-KIT Lite/ EZ Board

The is a video encoder EI3 extender board. It is separately sold daughter board that plugs onto the expansion interface 3 EI3 of an EZ-KIT Lite/EZ-Board evaluation system. The extender board aids the design and prototyping phases of embedded processor targeted applications. It is a low cost platforms facilitating the evaluation of video processing on an embedded processor via EZ-Board development hardware and the CrossCore embedded studio software development environment. The board extends the capabilities of the evaluation system by providing a connection between the parallel peripheral interface PPI of the processor and the ADV7511 and ADV7341 video encoders. The SPORT is used for transmitting audio data. The two wire interface TWI port of the processor is used to communicate to the video encoders and SoftConfig on the extender.

.

Video interface

.

No power supply required, derives power from the EZ-KIT Lite/EZ-Board

.

Traditional mechanical switches and jumpers

.

Multi format video encoding

.

225MHz high performance HDMI transmitter with ARC

.

Six 12bit noise shaped video DACs

.

Connections include HDMI, SVIDEO, composite and component

.

Formats up to 720p

.

Colour depths up to 24bits

.

Soft configuration

ESD sensitive device, take proper precaution while handling the device.

This board should not be used in or near any medical equipment or RF devices.