CD54HC157
高速 CMOS 逻辑四路 2 输入多路复用器
The HC157, HCT157, HC158, and HCT158 are quad 2-input multiplexers which select four bits of data from two sources under the control of a common Select input S. The Enable input E\\ is active Low. When E\\ is High, all of the outputs in the 158, the inverting type, 1Y\\-4Y\\ are forced High and in the 157, the non-inverting type, all of the outputs 1Y\\-4Y\\ are forced Low, regardless of all other input conditions.
Moving data from two groups of registers to four common output busses is a common use of these devices. The state of the Select input determines the particular register from which the data comes. They can also be used as function generators.
- .
- Common Select Inputs
- .
- Separate Enable Inputs
- .
- Buffered inputs and Outputs
- .
- Fanout Over Temperature Range
- .
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
- .
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
- .
- Wide Operating Temperature Range . . . -55°C to 125°C
- .
- Balanced Propagation Delay and Transition Times
- .
- Significant Power Reduction Compared to LSTTL Logic ICs
- .
- HC Types
- .
- 2V to 6V Operation
- .
- High Noise Immunity: NIL = 30%, NIH = 30%of VCC at VCC = 5V
- .
- HCT Types
- .
- 4.5V to 5.5V Operation
- .
- Direct LSTTL Input Logic Compatibility, VIL = 0.8V Max, VIH = 2V Min
- .
- CMOS Input Compatibility, Il 1µA at VOL, VOH
The CD54HC158 and CD74HC158 are obsolete and no longer are supplied.