BX40 BAGERO
BATRONIX BX40 BAGERO 编程器, BX40 BAGERO II, 自动编程启动, 多编程器控制
是一个高性能紧凑型编程器, 用于普通记忆芯片. 这一编程器展示了EPROM的高灵活性, 快速运行及便于使用, 支持一系列的芯片. 它设计独特, 高度仅2.5厘米的密封盒非常实用, 有着阳极氧化的压铸铝结构. 它极高的灵活性通过USB端口提供的所有电源获得, 不许电源适配器或电池, 所有编程所需电压都由USB供电的内部电压发生器供给. 所有编程芯片质量过硬, 并可通过使用最佳算法及微控制器管理的程序时间, 在短时间内被重新编程. 所有支持芯片都可通过DIP/DIL封装直接编程, 对于特殊的封装类型, 如PLCC, SOP, TSOP and QFP, 也有适合的适配器可选.
- .
- USB供电
- .
- 芯片自动识别
- .
- 多编程器控制
- .
- 自动程序启动
- .
- 支持多平台
- .
- 支持设备为老型的NMOS EPROM, NMOS EPROM, EEPROM NV-RAM, FLASH, LPC, FWH, Firmware Hubs
- .
- 通过 通用ISP适配器系统内编程ISP
- .
- USB 2.0全速12Mb/s
- .
- 芯片ID测试
- .
- 低电压支持低至3V
- .
- Size reduced by more than 40%: Now only 9 cm long before 15.3 cm
- .
- Weight reduced by more than 30%: With only 167 grams the device is to be used yet better for the service area before 241 grams
- .
- Doubled firmware memory size: The BX40 Bagero II has enough place for future improvements and enlarged chip support
- .
- Improved pin driving possibilities: The BX40 Bagero II can drive more pins with supplying and programming voltages as its predecessor
- .
- Improved chip supply: The supply and programming voltages of the chips can now be set more accurately
Batronix BX编程设备保修期为五年.
