OPA2703EA/2K5
CMOS轨到轨输入/输出运算放大器 CMOS, Rail-to-Rail, I/O OPERATIONAL AMPLIFIERS
DESCRIPON
The OPA703 and OPA704 series op amps are optimized for applications requiring rail-to-rail input and output swing. Single, dual, and quad versions are offered in a variety of packages. While the quiescent current is less than 200µA per amplifier, the OPA703 still offers excellent dynamic performance 1MHz GBW and 0.6V/µs SR and unity-gain stability. The OPA704 is optimized for gains of 5 or greater and provides 3MHz GBW and 3V/µs slew rate.
The OPA703 and OPA704 series are fully specified and guaranteed over the supply range of ±2V to ±6V. Input swing extends 300mV beyond the rail and the output swings to within 40mV of the rail.
The single versions OPA703 and OPA704 are available in the MicroSIZE SOT23-5 and in the standard SO-8 surface mount, as well as the DIP-8 packages. Dual versions OPA2703 and OPA2704 are available in the MSOP-8, SO-8, and DIP-8 packages. The quad OPA4703 and OPA4704 are available in the TSSOP-14 and SO-14 packages. All are specified for operation from –40°C to +85°C.
FEATURES
● RAIL-TO-RAIL INPUT AND OUTPUT
● WIDE SUPPLY RANGE:
Single Supply: 4V to 12V
Dual Supplies: ±2 to ±6
● LOW QUIESCENT CURRENT: 160µA
● FULL-SCALE CMRR: 90dB
● LOW OFFSET: 160µV
● HIGH SPEED:
OPA703: 1MHz, 0.6V/µs
OPA704: 3MHz, 3V/ µs
● MicroSIZE PACKAGES: SOT23-5, MSOP-8, TSSOP-14
● LOW INPUT BIAS CURRENT: 1pA
APPLICATIONS
● AUTOMOTIVE APPLICATIONS: Audio, Sensor Applications, Security Systems
● PORTABLE EQUIPMENT
● ACTIVE FILTERS
● TRANSDUCER AMPLIFIER
● TEST EQUIPMENT
● DATA ACQUISITION
