3223G-1-101E

BOURNS  3223G-1-101E  微调电位器, 100R, 11转, 1/4W, 20%

11-Turn 125mW 3mm Sealed Side Adjust 3223G Series

封闭设计，可承受标准板清洗处理

采用拾放定心设计，可实现自动化放置兼容性。

嵌入式调整螺钉

符合 EIA/EIAJ/IPC/VECI SMD 标准微调印迹

得捷:
TRIMMER 100 OHM 0.125W GW SIDE

欧时:
### 11-Turn 125mW 3mm Sealed Side Adjust 3223G SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器

贸泽:
Trimmer Resistors - SMD 3MM SQ MT CERMET TRIMMER

e络盟:
微调电位器, 100 ohm, 11 转, 表面安装设备, 3223G系列, 125 mW, ± 20%

艾睿:
Optimize functionality in your circuit by placing this 3223G-1-101E potentiometer from Bourns at critical points. This dependable part has a power rating of 0.125 1/8 W. This product has a resistance value of 100 Ohm. Its temperature coefficient is ±100 ppm/°C. This product will be shipped in tape and reel packaging so that components can be mounted effectively. The 3223G-1-101E part has a gull wing termination style. It has a tolerance of 20%. This device is made with cermet technology. This part has an operating temperature of -65 to 150 °C. This product is 3.9 mm long and 5.32 mm.

Allied Electronics:
3mm Sq SMD Trimming Pot, MT Cermet, 100R

安富利:
Res Cermet Trimmer 100 Ohm 20% 1/8W 11ElecTurn 3.9 X 5.32mm Gull Wing SMD Embossed T/R

Chip1Stop:
Res Cermet Trimmer 100 Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 5.32mm Gull Wing SMD T/R

Verical:
Res Cermet Trimmer 100 Ohm 20% 0.125W1/8W 11ElecTurns 3.96 X 5.32mm Gull Wing SMD T/R

Newark:
# BOURNS  3223G-1-101E  TRIMMER, 100R, 11 TURN, 1/4W, 20%

MASTER:
Res Cermet Trimmer 100 Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 5.32mm Gull Wing SMD T/R

Electro Sonic:
Res Cermet Trimmer 100 Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 5.32mm Gull Wing SMD T/R