3RR21411AW30

Relay, Monitor; CURRENT MONITR S00 1.6-16A 24-240VUC SCW

The SIRIUS 3RR2 current monitoring relays are suitable for the load monitoring of motors or other loads. The 3RR2 current monitoring relays can be integrated directly in the starter by mounting onto the 3RT2 contactor; separate wiring of the main circuit is not required. Separate transformers are also not required. For a line-oriented configuration or simultaneous use of an overload relay, terminal brackets for stand-alone installation are available for separate standard rail mounting.

* Directly Mountable onto 3RT2 Contactors, i.e. No Additional Wiring Outlay in the Main Circuit

* Optimally Coordinated with the Technical Characteristics of the 3RT2 Contactors

* Variably Adjustable to Overvoltage, UnderVoltage or Range Monitoring

* Freely Configurable Delay Times and RESET Response

* Display of ACTUAL Value and Status Messages

* All Versions with Removable Control Current Terminals

* Simple Determination of the Threshold Values Through Direct Reference to Actually Measured Values for Setpoint Loading

* Range Monitoring and Selectable Active Current Measurement Mean That Only One Device for Monitoring a Motor Is Required Along the Entire Torque Curve

* In Addition to Current Monitoring It is Also Possible to Monitor for Broken Cables, Phase Failure, Phase Sequence, Residual Current and Motor Blocking

Analog adjustable, closed circuit principle, 1 CO, 2-phase current monitoring, apparent current monitoring, start-up delay 0-60 sec.