XA6SLX45T-3FGG484I

FPGA XA Spartan®-6 Family 43661 Cells 45nm CMOS Technology 1.2V 484Pin FBGA

* XA Spartan-6 LXT FPGA: High-speed serial connectivity * Automotive Temperatures: * I-Grade: Tj = –40°C to +100°C * Q-Grade: Tj = –40°C to +125°C * Automotive Standards: * is ISO-TS16949 compliant * AEC-Q100 qualification * Production Part Approval Process PPAP documentation * Beyond AEC-Q100 qualification is available upon request * Designed for low cost * Multiple efficient integrated blocks * Optimized selection of I/O standards * Staggered pads * High-volume plastic wire-bonded packages * Low static and dynamic power * 45 nm process optimized for cost and low power * Hibernate power-down mode for zero power * Suspend mode maintains state and configuration with multipin wake-up, control enhancement * High performance 1.2V core voltage LX and LXT FPGAs, -2 and -3 speed grades * Multi-voltage, multi-standard SelectIO interface banks * Up to 1,080 Mb/s data transfer rate per differential I/O * Selectable output drive, up to 24 mA per pin * 3.3V to 1.2V I/O standards and protocols * Low-cost HSTL and SSTL memory interfaces * Hot swap compliance * Adjustable I/O slew rates to improve signal integrity * High-speed GTP serial transceivers in the LXT FPGAs * Up to 3.2 Gb/s * High-speed interfaces including: Serial ATA and PCI Express * Efficient DSP48A1 slices * High-performance arithmetic and signal processing * Fast 18 x 18 multiplier and 48-bit accumulator * Pipelining and cascading capability * Pre-adder to assist filter applications * Integrated Memory Controller blocks * DDR, DDR2, DDR3, and LPDDR support * Data rates up to 800 Mb/s * Multi-port bus structure with independent FIFO to reduce design timing issues * Abundant logic resources with increased logic capacity * Optional shift register or distributed RAM support * Efficient 6-input LUTs improve performance and minimize power * LUT with dual flip-flops for pipeline centric applications * Block RAM with a wide range of granularity * Fast block RAM with byte write enable * 18 Kb blocks that can be optionally programmed as two independent 9 Kb block RAMs * Clock Management Tile CMT for enhanced performance * Low noise, flexible clocking * Digital Clock Managers DCMs eliminate clock skew and duty cycle distortion * Phase-Locked Loops PLLs for low-jitter clocking * Frequency synthesis with simultaneous multiplication, division, and phase shifting * Sixteen low-skew global clock networks * Simplified configuration, supports low-cost standards * 2-pin auto-detect configuration * Broad third-party SPI up to x4 and NOR flash support * MultiBoot support for remote upgrade with multiple bitstreams, using watchdog protection * Enhanced security for design protection * Unique Device DNA identifier for design authentication * AES bitstream encryption in the XA6SLX75, XA6SLX75T, and XA6SLX100 devices * Integrated Endpoint block for PCI Express designs LXT * Low-cost PCI® technology support compatible with the 33 MHz, 32 * and 64-bit specification. * Faster embedded processing with enhanced, low cost, MicroBlaze™ 32-bit soft processor * Industry-leading IP and reference designs * Strong automotive-specific third-party ecosystem with IP, development boards, and design services