2981716
Multi-application Modular System - PSR-SPP SeriesThis can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection. Quick system extension up to 10 modules, offering a safety system with up to 42 contacts Automatic identification of desired operating mode, no need to set switches or define parameters The system is based on a master relay PSR-SDC that monitors e-stops, guard doors interlock or non-contact and optical devices e.g. light curtains Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple 24Vdc supply voltage Semiconductor output Depending on the wiring Safety category 2 or 4 can be maintained One or Two channel switches are used for control Note: The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B undelayed contacts and PSR-URD drop-out delay contacts can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final right hand extension device see datasheet for more details or by using connection plug PSR-TBUS-TP ### 可配置安全继电器
**Multi-application Modular System - PSR-SPP Series**
This can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection.
欧时:
DIN 导轨连接器,保护插头, PSR-TBUS-TP
得捷:
PSR T-BUS DUMMY PLUG
贸泽:
Relay Sockets & Hardware PSR-T-BUS-TP TERMINATION PLUG
Allied Electronics:
2981716 Blind Plug, For Use With PSR Series
Verical:
Blind plug for the PSR-TBUS DIN rail connector used with the modular safety relay system
MASTER:
Blind plug for the PSR-TBUS DIN rail connector used with the modular safety relay system PSR-SDC4
Online Components:
Connector Accessories Blind Plug
Electro Sonic:
Blind plug for the PSR-TBUS DIN rail connector used with the modular safety relay system PSR-SDC4