TRS3232
具有 +/-15kV ESD 保护的 3V 至 5.5V 多通道 RS-232 线路驱动器/接收器
The device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal-to-terminal serial-port connection terminals, including GND. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from one
3-V to 5.5-V supply. The devices operate at data-signaling rates up to 250 kbps and a maximum of 30-V/µs driver-output slew rate.
- .
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model HBM
- .
- Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU V.28 Standards
- .
- Operates With 3-V to 5.5-V VCC Supply
- .
- Operates up to 250 kbps
- .
- Two Drivers and Two Receivers
- .
- Low Supply Current: 300-µA Typical
- .
- External Capacitors: 4 × 0.1 µF
- .
- Accepts 5-V Logic Input With 3.3-V Supply
- .
- Alternative High-Speed Terminal-Compatible
Devices 1 Mbps
- .
- SN65C3232 –40°C to 85°C
- .
- SN75C3232 0°C to 70°C