MAX16063TG+

MAXIM INTEGRATED PRODUCTS  MAX16063TG+  芯片, 控制器, 稳压器, LDO

The is a 1% accurate, low voltage, quad window voltage detector in 24 pin TQFN package. This adjustable window voltage detector is designed to provide a higher level of system reliability by monitoring multiple supply voltages and providing fault signal when any of the voltages exceed their overvoltage thresholds or fall below their undervoltage thresholds. The MAX16063 offers user adjustable voltage thresholds that allow voltages to be monitored down to 0.4V. This allows upper and lower trip thresholds of each window detector to be set externally with use of three external resistors. Each monitored threshold has an independent open-drain output for signalling a fault condition. The open-drain outputs are internally pulled-up with 30µA current but can be externally driven to other voltage levels for interfacing to other logic levels. It is used in storage equipment, multivoltage ASICs, networking/telecommunications equipment and servers.

.

Operating voltage range is 1V to 5.5V

.

Operating temperature range from -40°C to 125°C

.

Monitors four undervoltage/overvoltage conditions

.

Adjustable threshold UVIN_ falling/OVIN_ rising of 0.390V to 0.398V

.

Manual reset input and margin enable input

.

Fixed or adjustable active-low RESET timeout

.

Remains asserted down to VCC = 1V

.

Supply current of 45µA VCC = 3.3V outputs deasserted and 50µA VCC = 5V, outputs deasserted

.

UVLO undervoltage lockout of 1.8V VCC rising

.

Reset timeout of 200ms SRT=VCC, 3.09ms CSRT=1500pF, 0.206ms CSRT=100pF and 0.05ms CSRT=open