PN7150B0HN/C11002Y

射频识别芯片, 13.56 MHz, NFC控制器, 读取, 写入, FeliCa PCD模式, 1.65 V至1.95 V电源, HVQFN-40

Overview

Optimized for fast design-in, ’s PN7150 NFC solutions fully comply with the NFC Forum, include Linux®, Android™, and WinIoT drivers and support NCI 1.0 host communication.

PN7150 is the high-performance version of PN7120, the plug’n play NFC solution for easy integration into any OS environment, reducing Bill of Material BOM size and cost. PN71xx controller are ideal for home-automation applications such as gateways and work seamlessly with NFC connected tags.

These NFC controllers support the most popular platforms, Raspberry Pi®, BeagleBone® Black and any boards featuring an Arduino® stackable header, including Kinetis®, LPCXpresso and i.MX boards.

MoreLess

## Features

### Full hardware and software compatibility

* Support for Linux, Android, Windows IoT, RTOS, NullOS

* Interface to Raspberry Pi, BeagleBone Black, and all boards with Arduino-compatible header

### All NFC operating modes

* Read/Write Mode: ISO/IEC 14443 A&B up to 848 kbit/s, FeliCa at 212 & 424 kbit/s, MIFARE 1K, 4K, NFC Forum type 1, 2, 3, 4, 5 tags, ISO/IEC 15693

* All peer-to-peer modes

* Card Emulation Mode from host: NFC Forum T4T ISO/IEC 14443 A&B at 106 kbit/s, NFC Forum T3T FeliCa, PN7150 only

### Flexible host interface

* Supply voltage: 1.8 to 3.3 V

* I2C interface: 3.4 Mbit/s

* NCI 1.0-compliant protocol

* IRQ signal for improved synchronization

### Complete, power-efficient NFC control

* RF driver: 3.0 to 4.75 V, 180mA max PN7150; 2.7 to 3.3 V, 180mA max PN7120

* Implemented according to device requirements v1.3

* Fully configurable polling loop with low-power mode

* Load modulation scheme: active PN7150, passive PN7120

### Standard packages

* HVQFN40 PN7150

* VFBGA49 PN7120