MICS 10

connector, pcb header, 1.27mm pitch, locking hooks, dual row staggered, 10Contact

* Rated Current, 1.2 A

* Rated Voltage, 32 VAC

* Body Material: Polybutylene Terephthalate

* Contact Material: CuSn, Tinned

* AWG 28-26

* Tab Header, with Retaining Hooks

* Solder Contacts, Dual Row Staggered

艾睿:
Use this tab MICS 10 connector from Lumberg when board-to-board interconnects is required. This HDR connector&s;s 10 contacts that are made out of brass and plated with tin over nickel. It has a header type gender. It has a maximum voltage rating of 32 VAC. Its pitch is 2.54 mm. This is a 1-row connector. It has a straight body orientation. This device has a maximum current rating of 1.2 A. This product comes packaged in bulk, so the parts will be stored loosely. MICS 10 is housed in polyamide. It uses the solder termination method. This product is 6.4 mm tall. This connector has an operating temperature of -40 to 105 °C.

Allied Electronics:
connector, pcb header, 1.27mm pitch, locking hooks, dual row staggered, 10 contact

安富利:
YLUMICS 10