LM2901QPWRQ1

四路差动比较器 QUADRUPLE DIFFERENTIAL COMPARATOR

Description

The LM2901x-Q1 family of devices consists of four independent voltage comparators, designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies is possible, provided the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. LM2901V-Q1 supports higher VCC voltage and LM2901AV-Q1 supports higher VCC and lower VIO.

Features

• Qualified for Automotive Applications

• AEC-Q100 Qualified With the Following Results:

   – Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range

   – Device HBM ESD Classification Level H2

   – Device CDM ESD Classification Level C6

• Single Supply or Dual Supplies

• Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical

• Low Input Bias Current: 25 nA Typical

• Low Input Offset Current: 2 nA Typical

• Low Input Offset Voltage: 2 mV Typical

• Common-Mode Input Voltage Range Includes Ground

• Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V

• Low Output Saturation Voltage

• Output Compatible With TTL, MOS, and CMOS

• For Single Version in 5-Pin SOT-23, See the TL331-Q1 SLVS969

Applications

• Automotive

   – HEV/EV and Power Trains

   – Infotainment and Clusters

   – Body Control Modules

• Industrial

• Power Supervision

• Oscillators

• Peak Detectors

• Logic Voltage Translation