ADS8342IPFBT

16位250KSPS4通道并行输出模数转换器 16 BIT 250KSPS4 CHANNEL PARALLEL OUTPUT ANALOG TO DIGITAL CONVERTER

The ADS8342 is a 4-channel, 16-bit analog-to-digital converter ADC. It contains a 16-bit succesive approximation register SAR, a capacitor-based ADC with an inherent sample-and-hold circuit, an interface for microprocessor use, and parallel 3-state output drivers. The ADS8342 is specified at a 250kHz sampling rate while dissipating only 200mW of power using a ±5V power supply.

The ADS8342 is available in a TQFP-48 package and is ensured over the –40°C to +85°C temperature range.

得捷:
IC ADC 16BIT SAR 48TQFP

贸泽:
Analog to Digital Converters - ADC 16-Bit 250 kSPS Par. Out 4 true bi ch

艾睿:
You&s;ll have no problem converting real world physical signals, such as light and temperature, into a sequence of digital data that a computer can read with this ADS8342IPFBT ADC from Texas Instruments. This device&s;s digital interface is parallel. It has a single-ended and pseudo-differential input signal. This device is based on SAR architecture. Its maximum power dissipation is 250 mW. This ADC has a resolution of 16bit. This ADC has an input voltage of ±2.5 V. Its typical dual supply voltage is ±5 V, with a minimum of ±4.75 V and maximum of ±5.25 V. This ADC has a minimum operating temperature of -40 °C and a maximum of 85 °C.

安富利:
ADC Single SAR 250ksps 16-bit Parallel 48-Pin TQFP T/R

Chip1Stop:
Single ADC SAR 250ksps 16-bit Parallel 48-Pin TQFP T/R

Newark:
# TEXAS INSTRUMENTS  ADS8342IPFBT  Analog to Digital Converter, Dual, 16 bit, 250 kSPS, Dual +/-, -4.75 V, 5.25 V, TQFP