KSZ9021RL

MICREL SEMICONDUCTOR  KSZ9021RL  以太网控制器, 1000 Mbps, IEEE 802.3, 3.3 V, LQFP, 64 引脚

The is a completely integrated triple speed 10Base-T/100Base-TX/1000Base-T Ethernet Physical-layer Transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair UTP cable. The KSZ9021RL provides the Reduced Gigabit Media Independent Interface RGMII for direct connection to RGMII MACs in gigabit Ethernet processors and switches for data transfer at 10/100/1000Mbps speed. It reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating a LDO controller to drive a low cost MOSFET to supply the 1.2V core. It provides diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9021 I/Os and board. LinkMD® TDR-based cable diagnostics permit identification of faulty copper cabling.

.

On-chip termination resistors for the differential pairs

.

125MHz Reference clock output

.

Programmable LED outputs for link, activity and speed

.

Baseline wander correction

.

LinkMD® TDR-based cable diagnostics for identification of faulty copper cabling

.

Parametric NAND Tree support for fault detection between chip I/Os and board

.

Loopback modes for diagnostics

.

Automatic MDI/MDI-X crossover for detection and correction of pair swap at all speeds of operation

.

Power down and power saving modes