THS4509
宽带运算放大器
The device is a wideband, fully-differential op amp designed for 5-V data acquisition systems. It has a low noise at 1.9 nV/√Hz, and low harmonic distortion of –75 dBc HD2 and –80 dBc HD3 at 100 MHz with 2 VPP, G = 10 dB, and 1-kΩ load. Slew rate is high at 6600 V/µs, and with settling time of 2 ns to 1% 2-V step, it is ideal for pulsed applications. It is designed for a minimum gain of 6 dB, but is optimized for gains of 10 dB.
To allow for DC coupling to analog-to-digital converters ADCs, its unique output common-mode control circuit maintains the output common-mode voltage within 3-mV offset typical from the set voltage, when set within 0.5-V of midsupply, with less than 4-mV differential offset voltage. The common-mode set point is set to midsupply by internal circuitry, which may be overdriven from an external source.
The input and output are optimized for best performance with the common-mode voltages set to midsupply. Along with high performance at low power-supply voltage, this design makes it ideal for high-performance, single-supply 5-V data acquisition systems. The combined performance of the THS4509 in a gain of 10 dB driving the ADS5500 ADC, sampling at 125 MSPS, is 81-dBc SFDR and 69.1-dBc SNR with a –1 dBFS signal at 70 MHz.
The THS4509 is offered in a quad, leadless VQFN-16 package RGT, and is characterized for operation over the full industrial temperature range from –40°C to +85°C.
- .
- Fully-Differential Architecture
- .
- Centered Input Common-Mode Range
- .
- Output Common-Mode Control
- .
- Minimum Gain of 2 V/V 6 dB
- .
- Bandwidth: 1900 MHz
- .
- Slew Rate: 6600 V/µs
- .
- 1% Settling Time: 2 ns
- .
- HD2: –75 dBc at 100 MHz
- .
- HD3: –80 dBc at 100 MHz
- .
- OIP3: 37 dBm at 70 MHz
- .
- Input Voltage Noise: 1.9 nV/√Hz f > 10 MHz
- .
- Power-Supply Voltage: 3 V to 5 V
- .
- Power-Supply Current: 37.7 mA
- .
- Power-Down Current: 0.65 mA
- .
- APPLICA ONS
- .
- 5-V Data Acquisition Systems High Linearity ADC Amplifiers
- .
- Wireless Communication
- .
- Medical Imaging
- .
- Test and Measurement
All other trademarks are the property of their respective owners