DAC7311
采用 SC70 的低功率单通道 1.8V 至 5.5V、80mA、8 位、10 位和 12 位 DAC
The DAC5311 8-bit, DAC6311 10-bit, and 12-bit devices are low-power, single-channel, voltage output digital-to-analog converters DACs. The low power consumption of these devices in normal operation 0.55 mW at 5 V, reducing to 2.5 µW in power-down mode makes it ideally suited for portable, battery-operated applications.
These devices are monotonic by design, provide excellent linearity, and minimize undesired code-to-code transient voltages while offering an easy upgrade path within a pin-compatible family. All devices use a versatile, three-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI™, QSPI™, Microwire, and digital signal processor DSP interfaces.
All devices use an external power supply as a reference voltage to set the output range. The devices incorporate a power-on reset POR circuit that ensures the DAC output powers up at 0 V and remains there until a valid write to the device occurs. The DAC5311, DAC6311, and DAC7311 contain a power-down feature, accessed over the serial interface, that reduces current consumption of the device to 0.1 µA at 2.0 V in power-down mode.
These devices are pin-compatible with the DAC8311 and DAC8411, offering an easy upgrade path from 8-, 10-, and 12-bit resolution to 14- and 16-bit. All devices are available in a small, 6-pin, SC70 SOT package. This package offers a flexible, pin- and function-compatible, drop-in solution within the family over an extended temperature range of 40°C to +125°C.
- .
- Relative Accuracy:
- .
- 0.25 LSB INL DAC5311: 8-Bit
- .
- 0.5 LSB INL DAC6311: 10-Bit
- .
- 1 LSB INL DAC7311: 12-Bit
- .
- _micro_Power Operation: 80 µA at 2.0 V
- .
- Power-Down: 0.5 µA at 5 V, 0.1 µA at 2.0 V
- .
- Wide Power Supply: 2.0 V to 5.5 V
- .
- Power-On Reset to Zero Scale
- .
- Straight Binary Data Format
- .
- Low Power Serial Interface With Schmitt-
Triggered Inputs: up to 50 MHz
- .
- On-Chip Output Buffer Amplifier, Rail-to-Rail
Operation
- .
- SYNC Interrupt Facility
- .
- Extended Temperature Range 40°C to +125°C
- .
- Pin-Compatible Family in a Tiny, 6-Pin SC70
Package