SBL1

BANNER ENGINEERING  SBL1  光电传感器, 30英尺

Banner MULTI-BEAM® sensors are compact modular self contained photoelectric switches. Each MULT-BEAM® solution consists of 3 components — Scanner Block, Power Block, and Logic Module.

The Scanner Block contains the complete modulated photoelectric amplifier as well as the emitter and receiver optoelements. It also contains the sensing optics and the housing for the other two modules. The Power Block provides the interface between the scanner and the external circuit. It contains a power supply for the MULTI-BEAM® plus a switching device to interface the circuit to the controller. The Logic Module not required for opposed mode emitters interconnects the power block and scanner block both electrically and mechanically. It provides the desired timing logic function if any, plus the ability to program the output for either light or dark response.

**

Create a Photoelectric Based on Your Application Requirements

Step 1: Choose a Sensor Block for the Required Sensing Mode

Step 2: Choose a Power Block for the Required Sensor Power AC or DC and Output

Step 3: Choose a Logic Module Not Required for Opposed Mode Emitters

Step 4: Plug in the Power and Logic Components into the Sensor Block

Step 5: Select Additional Options Fiber Optic Cables, Mounting Brackets as Needed

.

*

The 3 and 4 wire MULTI-BEAM® offer the greatest sensing configurations. They permit either AC or DC operations and offer the fastest response time and the greatest sensing ranges.

MULTI-BEAM® 3 and 4 Wire Scanner Blocks offer a complete complement of sensing modes. There are 3 or more models for each sensing mode, resulting in a choice of exactly the right sensor for any application. The high power models 10 millisecond response time offer greater optical sensing power than any other industrial sensor.

** Features**

* The Sensing Industry"s Most Flexible Modular Sensor Family, Permitting Over 5,000 Custom Configurations for AC and DC Power

* AC Models Are Physically and Electrically Interchangeable with Heavy-Duty Industrial Limit Switches to Provide Non-Contact Control

* AID Signal Strength Indicator System Keeps You Informed of the Sensor"s Status

** Specifications**

* Reinforced VALOX Housing, Rated NEMA 3, IEC IP54

* Operating Temperature: -40°C to 70°C