PIC16LF627-04I/SO
基于闪存的8位CMOS微控制器 FLASH-Based 8-Bit CMOS Microcontroller
Peripheral Features:
• 16 I/O pins with individual direction control
• High current sink/source for direct LED drive
• Analog comparator module with:
\- Two analog comparators
\- Programmable on-chip voltage reference VREF module
\- Programmable input multiplexing from device inputs and internal voltage reference
\- Comparator outputs are externally accessible
• Timer0: 8-bit timer/counter with 8-bit programmable prescaler
• Timer1: 16-bit timer/counter with external crystal/clock capability
• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Capture, Compare, PWM CCP module
\- Capture is 16-bit, max. resolution is 12.5 ns
\- Compare is 16-bit, max. resolution is 200 ns
\- PWM max. resolution is 10-bit
• Universal Synchronous/Asynchronous Receiver/Transmitter USART/SCI
• 16 Bytes of common RAM Special Microcontroller Features:
• Power-on Reset POR
• Power-up Timer PWRT and Oscillator Start-up Timer OST
• Brown-out Detect BOD
• Watchdog Timer WDT with its own on-chip RC oscillator for reliable operation
• Multiplexed MCLR-pin
• Programmable weak pull-ups on PORTB
• Programmable code protection
• Low voltage programming
• Power saving SLEEP mode
• Selectable oscillator options
\- FLASH configuration bits for oscillator options
\- ER External Resistor oscillator
• Reduced part count
\- Dual speed INTRC
• Lower current consumption
\- EC External Clock input
\- XT Oscillator mode
\- HS Oscillator mode
\- LP Oscillator mode
• In-circuit Serial Programming™ via two pins
• Four user programmable ID locations CMOS Technology:
• Low power, high speed CMOS FLASH technology
• Fully static design
• Wide operating voltage range
\- PIC16F627 - 3.0V to 5.5V
\- PIC16F628 - 3.0V to 5.5V
\- PIC16LF627 - 2.0V to 5.5V
\- PIC16LF628 - 2.0V to 5.5V
• Commercial, industrial and extended temperature range
• Low power consumption
\- < 2.0 mA @ 5.0V, 4.0 MHz
\- 15µA typical @ 3.0V, 32 kHz
\- < 1.0µA typical standby current @ 3.0V
