STM8AL3LE89TAX

Automotive 8Bit ultra-low-power MCU, 64 Kbytes Flash, LIN, RTC, LCD, data EEPROM, timers, USARTs, I2C, SPIs, ADC, DA...

The high-density STM8AL3xE8x ultra-low-power devices feature an enhanced STM8 CPU core providing increased processing power up to 16 MIPS at 16 MHz while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low-power operations.

The family includes an integrated debug module with a hardware interface SWIM which allows non-intrusive in-application debugging and ultrafast Flash programming.

All high-density STM8AL3xE8x microcontrollers feature embedded data EEPROM and low-power low-voltage single-supply program Flash memory.

The devices incorporate an extensive range of enhanced I/Os and peripherals, a 12-bit ADC, two DACs, two comparators, a real-time clock, AES, 8x40 or 4x44-segment LCD, four 16-bit timers, one 8-bit timer, as well as standard communication interfaces such as two SPIs, an I2C interface, and three USARTs. One 8x40 or 4x44-segment LCD is available on the STM8AL3LE8x devices. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

**Key Features**

.

AEC-Q100 grade 1 qualified

.

Operating conditions

.

Operating power supply range 1.8 V to 3.6 V down to 1.65 V at power down

.

Temp. range: -40 to 85 or 125 °C

.

Low-power features

.

5 low-power modes: Wait, Low-power run 5.9 μA, Low-power wait 3 μA, Active-halt with full RTC 1.4 μA, Halt 400 nA

.

Consumption: 200 μA/MHz+330 μA

.

Fast wake up from Halt mode 4.7 μs

.

Ultra-low leakage per I/0: 50 nA

.

Advanced STM8 core

.

Harvard architecture and 3-stage pipeline

.

Max freq: 16 MHz, 16 CISC MIPS peak

.

Up to 40 external interrupt sources

.

Reset and supply management

.

Low power, ultra safe BOR reset with 5 programmable thresholds

.

Ultra-low-power POR/PDR

.

Programmable voltage detector PVD

.

Clock management

.

32 kHz and 1-16 MHz crystal oscillators

.

Internal 16 MHz factory-trimmed RC and 38 kHz low consumption RC

.

Clock security system

.

Low-power RTC

.

BCD calendar with alarm interrupt,

.

Digital calibration with +/- 0.5ppm accuracy

.

Advanced anti-tamper detection

.

DMA

.

4 ch. for ADC, encryption hardware accelerator AES, DACs, SPIs, I2 C, USARTs, Timers, 1 ch. for memory-to-memory

.

LCD: 8x40 or 4x44 w/ step-up converter

.

12-bit ADC up to 1 Msps / 28 channels,

.

Temp. sensor and internal ref. voltage

.

Memories

.

Up to 64 Kbytes of Flash with up to 2 Kbytes of data EEPROM with ECC and RWW

.

Flexible write/read protection modes

.

Up to 4 Kbytes of RAM

.

2x12-bit DAC dual mode with output buffer

.

2 ultra-low-power comparators

.

1 with fixed threshold and 1 rail to rail

.

Wakeup capability

.

Timers

.

Three 16-bit timers with 2 channels IC, OC, PWM, quadrature encoder

.

One 16-bit advanced control timer with 3 channels, supporting motor control

.

One 8-bit timer with 7-bit prescaler

.

One window and one independent watchdog

.

Beeper timer with 1, 2 or 4 kHz frequencies

.

Communication interfaces

.

Two synchronous serial interface SPI

.

Fast I2 C 400 kHz SMBus and PMBus

.

Three USARTs IrDA, LIN 1.3, LIN2.0

.

Up to 67 I/Os, all mappable on interrupt vectors

.

Fast on-chip programming and non-intrusive debugging with SWIM, Bootloader using USART

.

96-bit unique ID